Aluminium/Steel Sealed end Rivets

Dome / Countersunk


MATERIAL:Aluminium / Steel
Steel / Steel
Stainless Steel / Stainless Steel
HEAD: Dome / Countersunk
TYPE: Sealed end



Material AL/Steel Steel/Steel Stainless Steel / Stainless Steel
SHELL AL Alloy
NR-4 (5052)
NR-5 (5154)
Carbon Steel
Zinc Plated
Stainless
Steel
AISI 304
MANDREL Carbon Steel
Phosphate
Coated
Carbon Steel
Zinc Plated
Stainless
Steel
AISI 304

This type of Rivets can be used in design that requires vibration, leak and pressure resistance. When rivet is fitted properly, the rivet body expands within the hole and fills up the hole and plugs the hole from the instrusion of moisture, gases and liquids. Thus increases the life of the joints.


(Dimension in mm)

Drill Size Hole Size Grip Range 
G
Rivet Size Head Dia D Rivet Dia 
d
Head Thick-ness K Rivet Length L Rivet P.No
3.30 3.30 0.5-2.0         6.5 MAT (Head-S) 3265
  3.40 2.0-4.0 3.2 6.6 3.2 1.1 8 MAT (Head-S) 3208
    4.0-6.0         10 MAT (Head-S) 3210
    6.5-8.5         12 MAT (Head-S) 3212
4.10 4.10 0.5-3.5         8 MAT (Head-S) 4008
  4.20 3.5-5.5 4.0 8.2 4.0 1.3 10 MAT (Head-S) 4010
    6.5-8.5         12 MAT (Head-S) 4012
4.90 4.90 1.0-3.0         8 MAT (Head-S) 4808
  5.0 3.0-5.0         11 MAT (Head-S) 4811
    5.0-7.0 4.8 9.8 4.8 1.6 12 MAT (Head-S) 4812
    7.0-9.0         14 MAT (Head-S) 4814
    9.0-11.0         16 MAT (Head-S) 4816
    14.0-16.0         21 MAT (Head-S) 4821

Remark :
1.Sealed end Rivets in CSK Head can be manufactured on request.

Strength Parameter
 Rivet Size Al/Steel Rivet Steel/Steel Rivet Stainless Steel/ Stainless Steel
Shear(Min)
KgF
Tensile(Min)
KgF
Shear(Min)
KgF
Tensile(Min)
KgF
Shear(Min)
KgF
Tensile(Min)
KgF
3.2 100 120 130 150 200 250
4.0 160 210 180 230 300 400
4.8 210 300 240 320 450 550

Quick-Finder